Q: I have a dome camera, and it's working great I however I cannot get it
to remember the time setting. I have downloaded the Time Setting
application, connect the camera to the PC, long press the button, run
the software and click save settings. After this if I connect the camera
to the power adapter while the blue LED is on (it stays on after
disconnecting the camera from the PC for about 5 seconds), it won't
start recording. If I connect it after it switched off, it records, but
the time is reset to 1980. How should this work?
A: Please follow as :
1. Insert TF card and connect the DVRCam to PC, (Don't press the menu button)
2. When the "Removable Disk" appears, download the "Time setting" software and click save settings.
Please check whether the current time is right in your zone and save it as below.
Time Correction: Insert TF card and connect DVRCam to PC, when the "removable disk" appears, download "Time setting" software in www.coomatec.com/support
If still not ok, Please help to confirm:
1.Do you set the time with TF card inserted? If not, please try with TF Card inserted.
2.After plug power out, does the indicator still stay on about 3 seconds? If not, it is the problem of built in battery.